Prospect and Suggestion of 3D Printing in Chinas Food Manufacture

doi:10.13304/j.nykjdb.2014.634

›› 2015, Vol. 17 ›› Issue (1): 1-6.DOI: 10.13304/j.nykjdb.2014.634

Prospect and Suggestion of 3D Printing in Chinas Food Manufacture

WU Shi-jia1, ZHANG Hui2, JIA Jing-dun2*

(1.State Key Laboratory of Food Science and Technology, School of Food Science and Technology, Jiangnan University, Jiangsu Wuxi 214122|2.China Rural Technology Development Center, Beijing 100045, China)

Received:2014-11-04 Revised:2015-01-09 Online:2015-02-15 Published:2015-02-15

3D打印技术在我国食品加工中的发展前景和建议

吴世嘉1,张辉2,贾敬敦2*

(1.江南大学食品学院, 食品科学与技术国家重点实验室, 江苏无锡 214122|2.中国农村技术开发中心, 北京 100045)

通讯作者: 贾敬敦，研究员，博士，主要从事农业政策和战略研究。E-mail: jiajd@most.cn
作者简介:吴世嘉|副教授|博士|主要从事食品加工营养研究。E-mail: wusj@jiangnan.edu.cn。
基金资助:
国家自然科学基金项目（31401576）;国家863计划项目(2011AA100801);江南大学自主科研计划（JUSRP11436）资助。

Abstract

Abstract:

Chinas food manufacture is in the quick developing period, and traditional food processing technology definitely meets revolutionary mutation due to by the development strategy of science and technology innovation. 3D printing is a new manufacturing method based on digital model file. In this paper, the application and challenge of 3D printing in Chinas food manufacture were introduced and discussed. Therefore, government and scientific research institutes were suggested to increase policy support and research strength, train professionals and strengthen the publicity in order to actively promote 3D printing technology application in food processing.

Key words: science and technology innovation, 3D printing, food manufacture

摘要：

目前我国食品加工业正处于高速发展时期，在科技创新发展战略的驱动下，传统食品加工技术必然迎来革命性的变革。3D打印技术是一种以数字模型文件为基础构造物体的新技术，概述了3D打印技术在我国食品加工应用中的发展前景，并提出了目前存在的问题和挑战。建议政府和科研单位加大对食品3D打印技术的政策扶持和科研投入，培养专门人才，同时加强宣传普及，积极推动3D打印技术在食品加工业中的应用。

关键词: 科技创新；3D打印；食品加工制造

CLC Number:

TS201

WU Shi-jia1, ZHANG Hui2, JIA Jing-dun2*. Prospect and Suggestion of 3D Printing in Chinas Food Manufacture[J]. , 2015, 17(1): 1-6.

吴世嘉1,张辉2,贾敬敦2*. 3D打印技术在我国食品加工中的发展前景和建议[J]. , 2015, 17(1): 1-6.

[1]	YU Hui, Liu Xxianwu. Status and Suggestion of Construction of Agricultural Science and Technology Innovation Center in China [J]. Journal of Agricultural Science and Technology, 2021, 23(10): 10-14.
[2]	CHEN Tianjin1, REN Yufeng2, KE Xiaohua1*. Comparison of Agricultural Science and Technology Innovation System in Europe and America and Enlightenments to China [J]. Journal of Agricultural Science and Technology, 2020, 22(11): 1-10.
[3]	YANG Yanli, MA Hongkun, WANG Xiaojun, MAO Shiping*. Construction Experience of Regional Agricultural Science and Technology Innovation Center in the Typical Developed Countries and Its Enlightenment to Beijing-Tianjin-Hebei Region [J]. Journal of Agricultural Science and Technology, 2019, 21(11): 9-16.
[4]	DU Shanshan1,2, ZHOU Aijun1, CHEN Hong2, DONG Xuyan2, WEI Fang2, LV Xin2. Application Progress of 3D Printing Technology in Food Fabrication [J]. Journal of Agricultural Science and Technology, 2018, 20(3): 87-93.
[5]	LIU Lei1, WANG Zhenzhong2*, LU Bingyou2. Application Status of Technology Readiness Levels and Policy Suggestions for its Application in Agricultural Science and Technology Innovation of China [J]. Journal of Agricultural Science and Technology, 2017, 19(10): 1-6.
[6]	JIA Jing-dun. Opportunities and Challenges of Food Physical Processing Science and Technology Innovation in China [J]. Journal of Agricultural Science and Technology, 2015, 17(5): 1-5.
[7]	WEI Xun1,2§, ZHU Huaping1,3§, SUN Kangtai1, HE Ronghai1,4, ZHANG Bo1,5, CHE D. Solutions on Science and Technology Innovation Driven Development of Food Industry in China [J]. , 2013, 15(1): 91-95.
[8]	ZHANG Dong1, JIANG Zhanfeng2*. AGIL Mode: Constructed Frame of Rural Science and Technology Innovation System [J]. , 2013, 15(1): 170-175.
[9]	SU Zhu-hua. Practice and Thoughts about Constructing South China Agricultural Science and Technology Innovation Service System ——Taking Guangdong Academy of Agricultural Sciences as an Example [J]. , 2011, 13(4): 7-14.
[10]	LU Liang-shu. Building up Modern Agriculture to Enhance Agricultural Science and \|Technology Innovation and System Reformation [J]. , 2007, 9(3): 1-3.
[11]	LIU Ai-jun . Functions of Partners of Science and Technology Innovation in Agriculture Industrialization——A Case Study in Jiangsu Province, China [J]. , 2005, 7(5): 73-75.

Prospect and Suggestion of 3D Printing in Chinas Food Manufacture

3D打印技术在我国食品加工中的发展前景和建议

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 11

Recommended Articles

Metrics